Table Of Contents
Quick answer: To get strata painting quotes in Melbourne, start with a building condition report so you know exactly what needs doing, confirm your owners corporation’s budget, shortlist three experienced contractors, and ask each to quote the same scope. Then compare the quotes on inclusions, access method, warranty and communication, not just price.
Painting is usually one of the largest maintenance projects an owners corporation approves, so the quote process matters as much as the painting itself. This guide is for strata managers and committees of larger buildings (30+ units, three levels and up) in Melbourne and Geelong who want quotes they can actually compare.
Step 1: Start With a Building Condition Report

Before anyone prices the job, find out what condition the building is really in. A building condition report identifies cracked render, coating failure, moisture damage, balcony defects and anything else that needs fixing before paint goes on. A drone inspection can check elevations that are hard to see from the ground.
This one step does three things:
- It stops contractors from guessing, so quotes are based on the same information.
- It gives the committee independent evidence to back its decisions.
- It shows what needs doing now and what can wait.
Step 2: Define the Scope
Write down exactly what you want quoted. For a typical strata painting project, that may include:
- Exterior painting of the apartment building, and common areas inside
- Balcony painting and restoration
- Concrete, render and crack repairs
- The paint system and colour scheme
- Access method: rope access, elevated work platform or scaffold (see our comparison of rope access vs scaffolding)
- Working hours and how residents will keep access to balconies, entries and parking
Step 3: Confirm the Budget
Check that the owners corporation has the funds, or a plan to raise them, before you ask for quotes. In Victoria, painting is normally funded from the maintenance fund, often called the sinking fund. Our guide explains what a maintenance fund is. Allow a contingency for repairs found once surfaces are prepared.
If a contractor offers staged or spread payments, ask for a clear breakdown of any financing or indexation built into the price, and a comparison against paying as the works progress.
Step 4: Shortlist Contractors
Look for contractors with real experience on multi-storey strata buildings, not just houses. Check that they can show:
- Current licences and insurance, including public liability cover for work at height
- References or case studies from similar buildings
- A site-specific safety plan (not a generic template)
- A project manager who will be your point of contact
Three contractors is a sensible number. More than that rarely improves the comparison, and good contractors may be less willing to put in the effort. For a wider overview of choosing a contractor, read The Essential Guide to Body Corporate & Strata Painting.
Step 5: Request Quotes on a Like-for-Like Basis
Give every contractor the same information: the building condition report, the scope, the access requirements and your timing constraints. Ask them to inspect the site in person. A quote based on a map or photos can’t account for anchor points, access or surface condition.
Step 6: Compare the Quotes Properly
The lowest price isn’t always the best value. Compare these items side by side:
- Scope and inclusions: Is everything in your scope covered, and are exclusions clearly listed?
- Preparation and repairs: Cleaning, crack repair and surface preparation are what make paint last.
- Paint system: A named, specified system, not just “two coats”.
- Access method: Is it suited to the building, and who pays for it?
- Programme: Start and finish dates, staging and weather allowances.
- Warranty: Length, what it covers and who stands behind it (see what a Dulux warranty covers).
- Safety and insurance: Site-specific plan, certifications, public liability cover.
- Resident communication: How and when residents will be told what’s happening.
- Payment terms: Milestones, and a clear breakdown if payments are staged.
Step 7: Choose a Contractor and Finalise the Contract
Choose on quality, experience and clarity as well as price. Before signing, make sure the contract sets out:
- The agreed scope and paint specification
- Start and completion dates, and the staging plan
- Payment terms and how variations will be handled
- Warranty terms and how defects are rectified
- A completion report with photos at handover, which gives the committee a record for future AGMs
What Affects the Cost of Painting an Apartment Building?
There’s no reliable single price per apartment or per square metre. The cost depends on the property or building itself, and on the type of paint that suits its location. The main cost drivers are:
- Building height and the access method needed
- The condition of the surfaces and how much repair is required
- The total area, and the number of coats
- The type of paint and coating system, chosen for the building’s location. A bayside or coastal building exposed to salt, wind and UV needs a more protective system than a sheltered inland one
- Balconies, balustrades and detailed facades
- Working in an occupied building, with restrictions on hours and areas
- Weather allowances and the length of the programme
That’s why a site-specific quote, based on a building condition report, is more useful than a rule-of-thumb figure.
After the Repaint: Keep It Protected
A repaint is the start of the asset’s next cycle, not the end. A strata maintenance plan with annual inspections, washing and touch-ups catches small defects before they become large costs, and keeps strata painting maintenance predictable for the owners corporation. For more on committee planning, read our Strata Painting Guide for Owners Corporation Committees.
Frequently Asked Questions
How many quotes should an owners corporation get for a painting project?
Three is a sensible number for most projects. Check your owners corporation rules and any legal requirements for the size of the works, and ask your strata manager if you’re unsure.
What’s the difference between an owners corporation and a body corporate?
They describe the same thing: the group of owners who manage a strata property’s common areas. “Owners corporation” is the legal term in Victoria, while “body corporate” is used in other states and is still widely searched in Melbourne.
How long does a strata repaint take?
It depends on the building’s size, height, condition and access method. Larger projects typically run from several weeks to a few months, and weather is the biggest variable.
How much does it cost to paint an apartment building?
There is no set price. It depends on the property or building itself, including its size, height, access, surface condition and the amount of repair work. It also depends on the type of paint, which should be chosen for the building’s location, since a coastal building needs a different coating from a sheltered inland one. A building condition report and a site-specific quote are the only way to get an accurate figure. See how we quote on our Melbourne strata painting page.
Should I choose the cheapest quote?
Not automatically. Compare what’s included, the preparation and repair allowance, the paint system, the warranty and the contractor’s experience. A low price that leaves out preparation can cost more in the long run.
Do you paint strata buildings in Geelong?
Yes. Avello Group takes on larger strata projects in Geelong and regional Victoria. See our Strata Painting Geelong page for recent projects.
Ready to Get Quotes for Your Building?
Avello Group provides strata and body corporate painting across Melbourne, Geelong, Sydney and Brisbane. See our strata and body corporate painting in Melbourne or strata painting in Geelong, or start with a building condition report, which gives you a clear scope to take to any contractor.
P 1300 283 556 | E info@avello.com.au
Related Resources
Free Building Assessment
Ready to protect your building?
Avello Group provides specialist commercial painting and building maintenance across Melbourne, Sydney and Brisbane. Start with a free site assessment — we'll inspect your building and give you a clear scope and cost estimate.
